Anti-Marten Indoor LED | ultrasonic repeller | plugs into power outlet

For attics, barns etc.
High frequency sonic deterrent with strobe light
- Marten repellent with sound and LED - powered by a wall socket
- Frequency modulation prevents habituation
- Additional light flashes for visual deterrence
- 230 V connection with europlug
- For attics, garages and other indoor situations
€24.90 *
Available, delivery time: 1–2 working days
€24.90*
€22.41*
€19.92*
Product information "Anti-Marten Indoor LED | ultrasonic repeller | plugs into power outlet"
Protects against martens in your house, garage, barn or attic. Simply connect the device with the power socket and the marten repeller is ready. The unit emits different high-freuquency sounds and disturb the delicate ear of the marten. This is unpleasant for the animals and they will start avoiding this area.
Animal: | marten |
---|---|
Anwendungsort Dachboden: | Innenbereich |
Place of operation: | indoors |
Power supply: | wall socket |
Principle of operation: | sound, ultrasound |
Special features: | frequency modulation technology |
Login
Manufacturer
tevigo GmbH
Raiffeisenstrasse 2d
38159 Vechelde
Germany
Phone: +49 0 53 02 93 48 78-8
Telefax: +49 0 53 02 93 48 78-9
e-Mail: service@tevigo.de
Safety Instructions
- Electrical appliances, packaging materials, etc. do not belong in the hands of children. Children may not play with the device.
- The device may only be used with the stated voltage: 230 V ~, 50 Hz
- The device may only be used by children over eight years and people with reduced physical, sensory or mental capabilities, or the lack of knowledge or experience, if they are supervised or have been instructed in the safe use of the device by a person responsible for their safety and have understood the dangers resulting out of the use.
- Repairs may only be made with original spare parts to avoid serious damage. If original parts are not used the device can become dangerous and warranty and CE become invalid.
- People who suffer from photosensitive epilepsy may experience epileptic seizures or loss of consciousness when exposed to certain flashing lights. If the following symptoms occur during operation: dizziness, blurred vision, eye or muscle twitching, loss of awareness, disorientation, any involuntary movement or convulsion, the light should be immediately turned off or the person should leave the area.
- This unit is suitable for indoor use only.
- Do not use the device if the device or the power cord is damaged. Disconnect the device immediately from the mains by pulling the plug from the socket. In order to avoid a hazard or electrocution, the device should be repaired by our service centre or a similarly qualified person.
- Do not remove any stickers from this device. The sticker may contain important safety information.
- The device must be protected from dampness, extreme cold and heat.
- Do not use this device in the vicinity of explosive gases, vapours or excessive dust.
- Make sure that the cables do not become a hazard. Make sure that the cables cannot become squashed or submitted to sharp edges or be damaged in any way.
- Should there be any open questions on the installation, the devices connected, the functions, the maintenance, the safety or any other point concerning this device, please contact a qualified person or our service centre.
- Never hold the device directly to your ear. Humans cannot hear frequencies > 16 kHz, but they might the device emits at a high volume and then therefore it might be harmful, if the ear is exposed to them over a longer period.
Specifications
- Covered area: 50 m² depending on the environment
- Line Voltage: 230 V ~50 Hz 1.5 W
- Sound pressure: 85 dB
- Sound frequency: 12–23 kHz ± 10 %
- Sound on time: 15 sec. ± 20 %
- Sound off time: 15 sec. ± 20 %
- Interval of LED-flash: appr. 4 sec. ON, appr. 26 sec OFF
- Connecting cable: ca. 1.5 m
- Dim.: 130 x 70 x 30 mm
